Identifier GUID-3A2F1E45-BFAC-42D9-984B-18155ED41333
Status Released
Replacing the microphones
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in Before
working inside your computer. After working inside your computer, follow
the instructions in After working inside your computer. For more safety best
practices, see the Regulatory Compliance home page at www.dell.com/
regulatory_compliance.
Identifier GUID-032C6904-C94B-42E1-980C-C365DCCF5977
Status Released
Procedure
1 Connect the microphones cable (DMIC1) to the microphone modules.
2 Align the microphone modules (4) with their slots on the middle frame.
3 Route the microphones cable (DMIC1) through the routing guides on middle
frame.
4 Replace the four screws (M2x4) that secures the microphone module to the
middle frame.
Identifier GUID-7E8ED145-5E0A-485E-9E46-CFB1A1437B4E
Status Released
Post-requisites
1 Replace the inner frame.
2 Replace the stand.
3 Replace the back cover.
40
To Next Page
Loading...
