Identifier GUID-665E66D0-54D4-403E-91DA-E6669EC906EC
Status Released
Removing the middle frame
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in Before
working inside your computer. After working inside your computer, follow
the instructions in After working inside your computer. For more safety best
practices, see the Regulatory Compliance home page at www.dell.com/
regulatory_compliance.
Identifier GUID-53918591-3B49-45C4-B25B-682511A7CA16
Status Released
Prerequisites
1 Remove the back cover.
2 Remove the stand.
3 Remove the hard drive.
4 Remove the inner frame.
5 Remove the camera.
6 Remove the microphones.
7 Remove the power-button board.
8 Remove the front bezel.
9 Remove the system-board shield.
10 Remove the chassis fan.
11 Remove the speakers.
12 Remove the side I/O-board.
13 Remove the wireless card.
14 Remove the processor heat sink.
15 Remove the I/O bracket.
16 Remove the I/O board.
104
To Next Page
Loading...
