Identifier GUID-690FF12D-2581-4326-8270-C4B813388FD3
Status Released
Replacing the camera
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in Before
working inside your computer. After working inside your computer, follow
the instructions in After working inside your computer. For more safety best
practices, see the Regulatory Compliance home page at www.dell.com/
regulatory_compliance.
Identifier GUID-A450E113-5E46-4B80-819A-5308E3927740
Status Released
Procedure
1 Connect the camera cable (WEBCAM) to the camera assembly.
2 Turn the camera assembly and align the screw holes on the camera assembly
with the screw holes on the middle frame.
3 Replace the two screws (M3x5) that secure camera assembly to the middle
frame.
Identifier GUID-7E8ED145-5E0A-485E-9E46-CFB1A1437B4E
Status Released
Post-requisites
1 Replace the inner frame.
2 Replace the stand.
3 Replace the back cover.
37
To Next Page
Loading...
