Identifier GUID-E8004503-F3A2-4044-A06D-72AF81105987
Status Released
Removing the processor heat-
sink
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before
working inside your computer. After working inside your computer, follow
the instructions in After working inside your computer. For more safety best
practices, see the Regulatory Compliance home page at www.dell.com/
regulatory_compliance.
CAUTION: For maximum cooling of the processor, do not touch the heat
transfer areas on the heat sink. The oils in your skin can reduce the heat
transfer capability of the thermal grease.
Identifier GUID-80B6901A-84B9-4E89-AECE-A1BD484B2AEF
Status Released
Prerequisites
1 Remove the back cover.
2 Remove the system-board shield.
81
To Next Page
Loading...
