Identifier GUID-A1A7E0D7-52BF-4F80-84FE-DF5301AE97BA
Status Released
Replacing the stand
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in Before
working inside your computer. After working inside your computer, follow
the instructions in After working inside your computer. For more safety best
practices, see the Regulatory Compliance home page at www.dell.com/
regulatory_compliance.
Identifier GUID-2CEB6A7E-9A11-4F89-A0D6-CF401756AE13
Status Released
Procedure
NOTE: The following procedure applies for both articulating and pedestal
stand options.
1 Place the tabs on the stand into the slots on the inner frame and snap them into
place.
2 Align the screw holes on the stand with the screw holes on the middle frame.
3 Replace the six screws (M4x6) that secure the stand to the middle frame.
Identifier GUID-3AF6ABC8-B9EC-4B01-A8E8-B63F09F90FF1
Status Released
Post-requisites
Replace the back cover.
25
To Next Page
Loading...
