Boot
Boot Mode:
1st Boot Device Displays the rst boot device.
2nd Boot Device Displays the second boot device.
3rd Boot Device Displays the third boot device.
4th Boot Device Displays the fourth boot device.
5th Boot Device Displays the fth boot device.
Hard Disk Drivers Displays the boot sequence of the hard drive.
USB Storage
Drivers
Displays the boot sequence of the USB storage drive.
CD/DVD ROM
Drivers
Displays the boot sequence of the optical drive.
Table 10. Power options
Power
Wake Up by
Integrated LAN/
WLAN
Allow the computer to be powered on by special LAN or
wireless LAN signals — Enabled or Disabled (Disabled by
default).
NOTE: This option can be enabled only if the Deep
Sleep Mode is set to Disable.
AC Recovery Allows you to congure the behavior of your computer after it
recovers from a power failure — Power O, Power On, or Last
Power State (Power O by default).
Auto Power On Allows you to enable or disable the computer from turning on
automatically — Enabled or Disabled (Disabled by default).
Auto Power On
Mode
Allows you to set the computer to turn on automatically every
day or on a preselected date.
NOTE: This option can be congured only if the Auto
Power On mode is set to Enabled Everyday .or
Selected Day (Selected Day by default).
Auto Power On
Date
Allows you to set the date on which the computer must turn
on automatically.
124