Steps
1. Align the notch on the WWAN card with the tab on the WWAN-card slot and insert the WWAN card at an angle into the WWAN-card
slot.
2. Connect the antenna cables to the WWAN card and align the WWAN-card bracket on the WWAN card.
The following table provides the antenna-cable color scheme for the WWAN card supported by your computer.
Table 2. Antenna-cable color scheme
Connectors on the WWAN card Antenna-cable color
M White/Grey
M1 Blue
M2 Orange
D/G Black/Grey
3. Replace the screw (M2x3) that secures the WWAN bracket to the WWAN card.
4. Place the WWAN-card shield on the WWAN card.
Next steps
1. Install the battery.
2. Install the base cover.
26
Removing and installing components