Installing the system board
Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
About this task
The following image indicates the connectors on your system board.
Figure 2. System-board connectors
1. Display cable
2. Touchscreen cable (available only in touchscreen computers)
3. Coin-cell battery cable
4. Keyboard-backlit cable
5. Keyboard cable
6. Fingerprint-reader cable
7. Battery cable
8. Touchpad cable
9. I/O-board cable
The following image indicates the location of system board and provides a visual representation of the installation procedure.
52
Removing and installing components
To Next Page
Loading...
