Steps
After performing the steps in the pre-requisites, we are left with the palm rest.
Installing the palmrest
Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
About this task
The following image indicates the palmrest and provides a visual representation of the installation procedure.
Steps
Place the palmrest on a flat surface.
Next steps
1. Install the keyboard.
2. Install the system board.
3. Install the power button with optional fingerprint reader.
4. Install the I/O board.
5. Install the heat sink (discrete graphics card) or heat sink (integrated graphics card), whichever applicable.
6. Install the speakers.
7. Install the fan (discrete graphics card) or fan (integrated graphics card), whichever applicable.
8. Install the display assembly.
9. Install the M.2 2280 solid-state drive/Intel Optane or M.2 2230 solid-state drive, whichever applicable.
10. Install the battery.
11. Install the base cover.
12. Follow the procedure in After working inside your computer.
60
Removing and installing components
To Next Page
Loading...
