Next steps
1. Install the fan (discrete graphics card) or fan (integrated graphics card), whichever applicable.
2. Install the battery.
3. Install the base cover.
4. Follow the procedure in after working inside your computer.
Power button
Removing the power button
Prerequisites
1. Follow the procedure in Before working inside your computer.
2. Remove the base cover.
3. Remove the battery.
4. Remove the fan (discrete graphics card) or fan (integrated graphics card), whichever applicable.
5. Remove the I/O board.
About this task
The following image indicates the location of power button and provides a visual representation of the removal procedure.
Steps
1. Remove the two screws (M1.4x2.3) that secure the power button to the palm-rest assembly.
2. Lift the power button off the palm-rest assembly.
44
Removing and installing components
To Next Page
Loading...
