Dell Latitude 3310 - Recommended Tools

Table 1. Screw Size List (continued)
Component Quantity Screw type Image
Hinges to LCD back cover 6 M2.5 x 3.5
● Touchpad to palmrest
● I/O Daughter
● I/O Board to palmrest
● 3
● 1
● 1
M2.0 x 3.0 (large head)
Hinges to palmrest 5 M2.5 x 5.0
● LCD bezel to back cover
● DC-In bracket to MB
● I/O board to palmrest
● System board to palmrest
● SSD to SSD Bracket
● 2
● 1
● 1
● 1
● 1
M2.0 x 4.0
● Base cover to palmrest
● Heatsink to system board
● 10
● 4
M2.5 x 8.0 Captive screws (Part of the
base cover)
Recommended tools
The procedures in this document may require the following tools:
● Phillips #0 screwdriver
● Phillips #1 screwdriver
● Plastic scribe - Recommended for field technician
14
Disassembly and reassembly