Dell Latitude 3310 - DC-In Cable; Removing the DC-In Cable

4. Install the:
a. battery
b. base cover
c. microSD card
5. Follow the procedure in After working inside your computer.
Dc-in cable
Removing the DC-in cable
1. Follow the procedure in Before working inside your computer.
2. Remove the:
a. microSD card
b. base cover
c. battery
3. Disconnect the DC-in cable from its connector on the system board [1].
4. Remove the one M2.0x4.0 and one M2.0x2.0 screws securing the DC-in port to the palmrest and the system board [2].
5. Flip over the metal bracket on the USB Type-C port of the system board [3].
6. Lift to remove the DC-in port from the computer [4].
Disassembly and reassembly
49