Dell Latitude 3310 - Palmrest; Removing the palmrest

d. I/O board cable [4]
e. Coin cell connector [5]
6. Install the:
a. DC-in cable
b. fan
c. heat sink
d. memory module
e. SSD
f. WLAN card
g. battery
h. base cover
i. microSD card
7. Follow the procedure in After working inside your computer.
Palmrest
1.
NOTE:
After disassembling the system board, you are left with the palmrest along with the touchpad which is one
complete unit.
Follow the procedure in Before working inside your computer.
2. Remove the:
a. microSD card
b. base cover
c. battery
d. coin cell
e. WLAN card
f. SSD
g. speakers
h. i-o daughterboard
i. keyboard
j. display assembly
78
Disassembly and reassembly