Figure 4. M.2 2230 SSD
3. Install the SSD.
4. Reconnect the battery cable to the connector on the system board.
5. Install the:
a. base cover
b. microSD card
6. Follow the procedure in After working inside your computer.
Keyboard
Removing the keyboard
1. Follow the procedure in Before working inside your computer.
2. Remove the:
a. microSD card
b. base cover
c. battery
3. Disconnect the keyboard cable from the system board [1].
4. Hold the sides of the palmrest securely while pushing into the two release holes using a plastic scribe [2].
Disassembly and reassembly
31
To Next Page
Loading...
