3. Install the:
a. battery
b. base cover
c. microSD card
4. Follow the procedure in After working inside your computer.
System Fan
Removing the system fan
1. Follow the procedure in Before working inside your computer.
2. Remove the:
a. microSD card
b. base cover
3. Disconnect the battery cable from the connector on the system board.
4. Unroute and pry out the WLAN antennae cable from the hook near the fan case [1].
5. Disconnect the system fan connector from the system board [2].
6. Remove the two M2.0x3.0 screws [1] that secure the system fan to the palmrest.
7. Lift the system fan off from the palmrest [2].
Disassembly and reassembly
53