Removing and installing components
NOTE: The images in this document may differ from your computer depending on the configuration you ordered.
Recommended tools
The procedures in this document may require the following tools:
● Phillips #0 screwdriver
● Plastic scribe
Screw List
The following table shows the screw list and the image of the screws.
Table 1. Screw list
Component Screw type Quantity Image
Base cover Captive screws 7
3-cell battery M2x3 3
4-cell battery M2x3 5
Solid-state drive bracket M2x3 1
WLAN M2x3 1
Left system Fan M2x3 2
Right system Fan M2x3 2
Display cable bracket M2x2.5 1
Display hinge bracket M2x2.5
M2x3
1
4
Input Output board M2x2.5 1
Touchpad bracket M2x2 3
2
10 Removing and installing components
To Next Page
Loading...
