Power adapter port
Removing the power adapter port
Prerequisites
1. Follow the procedure in before working inside your computer.
2. Remove the microSD-card.
3. Enter the service mode.
4. Remove the base cover.
5. Remove the speaker.
6. Remove the M.2 solid-state drive.
7. Remove the system fan.
8. Remove the display assembly.
9. Remove the input output board.
10. Remove the heatsink assembly.
11. Remove the power button with fingerprint reader.
12. Remove the system board.
NOTE: The system board can be removed with the heat sink attached.
About this task
The following image indicates the location of the power adapter port and provides a visual representation of the removal
procedure.
Steps
1. Unroute the power adapter port cable from the screw post.
CAUTION:
Carefully unroute the power adapter port cable from the screw post before removing the power
adapter port from the chassis.
2. Remove the power adapter port from the chassis.
56
Removing and installing components
To Next Page
Loading...
