10. Remove the heatsink assembly.
11. Remove the power button with fingerprint reader.
About this task
The following image indicates the connectors on your system board.
Figure 1. System-board connectors
1.
Power button with fingerprint reader cable 2. Speaker cable
3. Display cable 4. Power cable
5. Backlit LED cable 6. Keyboard cable
7. Touchpad cable 8. Coin-cell battery cable
9. Input output board cable
The following images indicate the location of the system board assembly and provide a visual representation of the removal
procedure.
Removing and installing components
51
To Next Page
Loading...
