5. Remove the heat sink.
6. Remove the display assembly.
About this task
The following images indicate the system board connectors.
Figure 42. System board connectors
1.
Display cable connector 2. Keyboard-backlight cable connector (for computers shipped
with keyboard backlight)
3. Keyboard cable connector 4. Battery cable connector
5. Touchpad cable connector 6. Fan cable connector
7. Solid-state drive slot 8. Fingerprint-reader cable connector (for computers shipped
with a fingerprint reader)
9. Wireless-card slot 10. Speaker cable connector
The following images indicate the location of the system board and provide a visual representation of the removal procedure.
Removing and installing Field Replaceable Units (FRUs)
67
To Next Page
Loading...
