● Storage health info - A quick (1 - 2 seconds) way to rule out whether the storage is the cause of the failure. The
results will provide a percentage of the lifetime of the storage used.
● Storage self-test (short) - This option enables you to run a quick storage test.
● Storage self-test (extended) - This option enables you to run an extended storage test.
● Memory check (quick) - A quick (less than a minute) single scan of the RAM. Use this option before a full memory test.
● Memory check (full) - A lengthier (approximately 3 to 5 minutes) test that runs multiple patterns to detect transient
errors. Use this option if you suspect that the quick test did not catch any issues.
Troubleshooting
91
To Next Page
Loading...
