Dell Latitude 5411 - Memory modules

Steps
1. Locate the WWAN card slot on your computer.
2. Slide the WWAN card into the slot on the system board.
3. Connect the WWAN antenna cables to the WWAN module.
4. Place the WWAN card bracket on the WWAN card and replace the single (M2x3) screw to secure the bracket to the computer.
Next steps
1. Install the battery.
2. Install the base cover.
3. Follow the procedure in After working inside your computer.
Memory modules
Removing the memory module
Prerequisites
1. Follow the procedure in Before working inside your computer.
2. Remove the base cover.
3. Remove the battery.
22
Disassembly and reassembly