Display (eDP) cable
Removing display cable
Prerequisites
1. Follow the procedure in Before working inside your computer.
2. Remove the base cover.
3. Remove the battery.
4. Remove the display assembly.
5. Remove the display bezel.
6. Remove the display hinge caps.
7. Remove the display panel.
8. Remove the camera.
About this task
The figure indicates the location of the display cable and provides a visual representation of the removal procedure.
Steps
Peel the conductive tape and unroute the display cable to release it from adhesive and lift the display cable from the display back cover.
66
Disassembly and reassembly
To Next Page
Loading...
