Installing the display bezel
Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
About this task
The figure indicates the location of the display bezel and provides a visual representation of the installation procedure.
Steps
Align the display bezel with the display back-cover and antenna assembly, and gently snap the display bezel into place.
Next steps
1. Install the display assembly.
2. Install the WLAN card.
3. Install the WWAN card.
4. Install the battery.
5. Install the base cover.
6. Follow the procedure in After working inside your computer.
74
Disassembly and reassembly
To Next Page
Loading...
