Dell Latitude 5411 - LED Board; Removing the LED Board

Next steps
1. Install the LED board.
2. Install the inner frame.
3. Install the WLAN card.
4. Install the WWAN card.
5. Install the 2280 SATA SSD.
6. Install the battery.
7. Install the base cover.
8. Follow the procedure in After working inside your computer.
LED board
Removing the LED board
Prerequisites
1. Follow the procedure in Before working inside your computer.
2. Remove the base cover.
3. Remove the battery.
4. Remove the 2280 SATA SSD.
5. Remove the WLAN card.
6. Remove the WWAN card.
7. Remove the inner frame.
About this task
The figure indicates the location of the LED board and provides a visual representation of the removal procedure.
48
Disassembly and reassembly