Installing display hinge
About this task
The figure indicates the location of the camera and provides a visual representation of the installation procedure.
Steps
1. Place the display hinge on the display assembly.
2. Replace the four (M2.5x3) screws to secure the display hinge to the display assembly.
Next steps
1. Install the display panel.
2. Install the display hinge caps.
3. Install the display bezel.
4. Install the display assembly.
5. Install the battery.
6. Install the base cover.
7. Follow the procedure in After working inside your computer.
Disassembly and reassembly
65
To Next Page
Loading...
