Dell Latitude 5411 - Installing the SATA M.2 2280 SSD

Steps
1. Locate the SSD on your computer.
2. Remove the thermal tape from the SSD module.
3. Remove the single (M2x3) screw that secure the SSD module to the computer.
4. Slide the SSD module out from the computer.
Installing the SATA M.2 2280 SSD
Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
About this task
The figure indicates the location of the SATA M.2 2280 SSD and provides a visual representation of the installation procedure.
Disassembly and reassembly
25