Installing display cable
About this task
The figure indicates the location of the camera and provides a visual representation of the installation procedure.
Steps
1. Adhere the display cable to the display back cover.
2. Adhere the conductive tape and route the display cable to the display back cover.
Next steps
1. Install the camera.
2. Install the display panel.
3. Install the display hinge caps.
4. Install the display bezel.
5. Install the display assembly.
6. Install the battery.
7. Install the base cover.
8. Follow the procedure in After working inside your computer.
Disassembly and reassembly
67
To Next Page
Loading...
