Dell Latitude 5411 - Installing the Coin-Cell Battery

3. Remove the battery.
About this task
The figure indicates the location of the coin-cell and provides a visual representation of the removal procedure.
Steps
1. Locate the coin-cell battery on your computer.
2. Disconnect the coin-cell battery cable from the connector on the system board.
3. Lift the coin-cell battery out of the computer.
Installing the coin-cell battery
Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
About this task
The figure indicates the location of the coin-cell and provides a visual representation of the installation procedure.
40
Disassembly and reassembly