Heatsink assembly-discrete
Removing the heatsink assembly-discrete
Prerequisites
1. Follow the procedure in Before working inside your computer.
2. Remove the base cover.
3. Remove the battery.
4. Remove the inner frame.
About this task
The figure indicates the location of the Heatsink and provides a visual representation of the removal procedure.
Steps
1. Locate the heatsink on your computer.
2. Disconnect the fan cable from the connector on the system board.
3. Remove the seven (M2x3) screws that secure the heatsink assembly to the system board.
Disassembly and reassembly
35
To Next Page
Loading...
