Dell Latitude E6420 - Installing the Display Hinge Covers

Installing the Display Hinge Covers
1. Place the display hinges in the appropriate positions.
2. Replace the display hinge cover to the computer.
3. Install the Display Assembly .
4. Install the DC-in port .
5. Install the
System Board .
6. Install the ExpressCard Cage
7. Install the Palmrest Assembly .
8. Install the
Modem Card .
9. Install the Keyboard .
10. Install the Keyboard Trim .
11. Install the
Bluetooth Card .
12. Install the Heat Sink and Processor .
13. Install the Coin Cell Battery .
14. Install the
WWAN Card .
15. Install the WLAN Card .
16. Install the
Hard Drive .
17. Install the Memory .
18. Install the Optical Drive .
19. Install the
ExpressCard .
20. Install the Base Cover .
21. Install the SD Card .
22. Install the
Battery .
23. Install the ATG Port Cover (only for E6420 ATG systems).
24. Install the ATG Handle (only for E6420 ATG systems).
25. Follow the procedures in
After Working Inside Your Computer .
110