Dell Latitude E6420 - I;O Panel Service; Removing the I;O Board

Input/Output Panel 28
Removing the Input/Output (I/O) Board
1. Follow the procedures in Before Working On Your Computer .
2. Remove the
ATG Handle (only for E6420 ATG systems).
3. Remove the ATG Port Cover (only for E6420 ATG systems).
4. Remove the Battery .
5. Remove the
Secure Digital Card .
6. Remove the Base Cover .
7. Remove the ExpressCard .
8. Remove the
Optical Drive .
9. Remove the Memory .
10. Remove the Hard Drive .
11. Remove the WLAN Card .
12. Remove the WWAN Card .
13. Remove the Coin Cell Battery .
14. Remove the
Heat Sink and Processor .
15. Remove the Bluetooth Card .
16. Remove the Keyboard Trim .
17. Remove the Keyboard .
18. Remove the Modem Card .
19. Remove the Palmrest Assembly .
20. Remove the ExpressCard Cage .
21. Remove the screw securing the I/O board to the computer.
95