Hard drive
Removing hard drive
1 Follow the procedure in Before working inside your computer.
2 Remove the:
a stand
b optical drive
c back cover
d system board shield
3 To remove hard drive:
a Remove the M3X3.5.5 screws that secure the hard drive to the computer [1].
b Slide and remove the hard drive from the computer [2].
Installing hard drive
1 Place the hard drive on the slot and slide it in to align with the screw holders and to connect it to the connector on the system board.
2 Replace the M3X3.5 screws to secure the hard drive on the computer.
3 Install the:
a system board shield
b back cover
c optical drive
d stand
4 Follow the procedure in After working inside your computer.
14
Removing and installing components
To Next Page
Loading...
