b Remove the M2x2.5 screws that secure graphics card assembly on the computer [3].
c Lift the graphics card assembly away from the computer [4].
Installing graphics card assembly
1 Align and place the graphics card assembly in the slot on the chassis.
2 Replace the M2x2.5 screws to secure the graphics card assembly on the computer.
3 Connect the graphics card and SATA ODD cables to the connector on the system board.
4 Install the:
a system board shield
b back cover
c optical drive
d stand
5 Follow the procedure in After working inside your computer.
Processor
Removing processor
1 Follow the procedure in Before working inside your computer.
2 Remove the:
a stand
b optical drive
c back cover
d system board shield
e heat sink
3 To remove processor:
26
Removing and installing components
To Next Page
Loading...
