Adjusting brightness in Windows 7
To enable or disable automatic screen brightness adjustment:
1 Click Start → Control Panel → Display.
2 Use the Adjust brightness slider to enable or disable automatic-brightness adjustment.
NOTE: You can also use the Brightness level slider to adjust the brightness manually.
Adjusting brightness in Windows 10
To enable or disable automatic screen brightness adjustment:
1 Right-click All Settings → System → Display.
2 Use the Adjust my screen brightness automatically slider to enable or disable automatic-brightness adjustment.
NOTE: You can also use the Brightness level slider to adjust the brightness manually.
Connecting to external display devices
Follow these steps to connect your computer to an external display device:
1 Ensure that the projector is turned on and plug the projector cable into a video port on your computer.
2 Press the Windows logo+P key.
3 Select one of the following modes:
• PC screen only
• Duplicate
• Extend
• Second Screen only
Intel HD Graphics
This computer is shipped with the Intel HD Graphics graphics chipset.
Intel HD Graphics drivers
Verify if the Intel HD Graphics drivers are already installed in the computer.
Table 4. Intel HD Graphics drivers
Before installation After installation
Technology and components 41
To Next Page
Loading...
