a Remove the M3x3.7 screws that secure the display assembly to the chassis [1].
b Lift the display assembly away from the computer [1]
Installing display assembly
1 Place the chassis display assembly on the chassis.
2 Replace the M3x3.7 screws to secure the display assembly to the computer.
3 Connect the touch and eDP cable.
4 Ax the adhesive tapes to secure the display assembly.
5 Install the:
a chassis frame
b system board
c graphics card assembly
d speaker
e OSD board
f system fan
g processor
h heat sink
i WLAN card
j SSD card
k coin cell battery
l memory module
m cable holder
n system board shield
o hard drive
p back cover
q optical drive
34
Removing and installing components
To Next Page
Loading...
