Dell OptiPlex 3050 - Installing Camera

Installing camera
1 Align and place the camera module on the display frame on the computer.
2 Connect the camera cables.
3 Tighten the M3 0.5x5 screws to secure the camera to the computer.
4 Install the:
a display assembly
b chassis frame
c system board
d graphics card assembly
e speaker
f OSD board
g system fan
h processor
i heat sink
j WLAN card
k SSD card
l coin cell battery
m memory module
n cable holder
o system board shield
p hard drive
q back cover
r optical drive
s stand
5 Follow the procedure in After working inside your computer.
36
Removing and installing components