WLAN card
Removing WLAN card
1 Follow the procedure in Before working inside your computer.
2 Remove the:
a stand
b optical drive
c back cover
d system board shield
3 To remove WLAN card:
a Disconnect the antenna cables from the connectors on the WLAN card [1].
b Remove the M2x 2.5 screw that secures the WLAN card to the system board [2].
c Hold the WLAN card, and pull it from the connector on the system board [3].
Installing WLAN card
1 Align the WLAN card to the connector on the system board.
2 Replace the M2x2.5 screw to secure the WLAN card to the system board.
NOTE
: Best practise: Connect the cables and then insert the card into the slot.
3 Connect the antenna cables to the connectors on the WLAN card.
4 Install the:
a system board shield
b back cover
c optical drive
Removing and installing components
19
To Next Page
Loading...
