Solid State Drive (SSD)
Removing Solid State Drive (SSD) card
1 Follow the procedure in Before working inside your computer.
2 Remove the:
a stand
b optical drive
c back cover
d system board shield
3 To remove SSD card:
a Remove the M2x2.5 screw that secures the SSD card to the system board [1].
b Lift the SSD card away from the connector [2].
Installing Solid State Drive (SSD) card
1 Insert the SSD card to the connector on the system board.
2 Replace the screw to secure the SSD card to the system board.
3 Install the:
a system board shield
b back cover
c optical drive
d stand
4 Follow the procedure in After working inside your computer.
18
Removing and installing components
To Next Page
Loading...
