Dell OptiPlex 5250 - Page 50

Option Description
Default setting: Not set
System Password Allows you to set, change or delete the system password.
NOTE: Successful password changes take eect immediately.
Default setting: Not set
Strong Password Allows you to enforce the option to always set strong passwords.
Default Setting: Enable Strong Password is not selected.
NOTE: If Strong Password is enabled, Admin and System passwords must contain at least one
uppercase character, one lowercase character and be at least 8 characters long.
Password
Conguration
Allows you to determine the minimum and maximum length of Administrator and System passwords.
Password Bypass Allows you to enable or disable the permission to bypass the System and the Internal HDD password, when they
are set. The options are:
• Disabled
• Reboot bypass
Default setting: Disabled
Password Change Allows you to enable the disable permission to the System and Hard Drive passwords when the admin password is
set.
Default setting: Allow Non-Admin Password Changes is selected.
UEFI Capsule
Firmware Updates
This option controls whether the system allows BIOS updates through UEFI capsule update packages.
NOTE: Disabling this option will block the BIOS updates from services such as Microsoft Windows
Update and Linux Vendor Firmware Service (LVFS).
This option is enabled by default.
TPM 2.0 Security Allows you to enable the Trusted Platform Module (TPM) during POST. This option is enabled by default. The
options are:
• TPM On
• Clear
• PPI Bypass for Enabled Commands
• PPI Bypass for Disabled Commands
NOTE: Activation, deactivation, and clear options are not aected if you load the setup program's
default values. Changes to this option take eect immediately.
Computrace Allows you to activate or disable the optional Computrace software The options are:
• Deactivate
• Disable
• Activate
NOTE: The Activate and Disable options will permanently activate or disable the feature and no further
changes will be allowed
50 System setup