Dell OptiPlex 5250 - POST Behavior Screen Options; Virtualization Support Screen Options

Option Description
Block Sleep (S3 state)
Default setting: This option is disabled
Intel Ready Mode This option enables the capability of Intel Ready Mode technology.
POST behavior screen options
Option Description
Numlock LED Species if the NumLock function can be enabled when the system boots. This option is enabled by default.
Keyboard Errors Species whether keyboard related errors are reported when it boots. This option is enabled by default.
Fastboot Allows you to speed up the boot process by bypassing some of the compatibility steps. The options are:
• Minimal
• Through (default)
• Auto
Extended BIOS
POST Time
This option creates an additional pre-boot delay and allows you to see the POST status messages. The options are:
• 0 seconds (default)
• 5 seconds
• 10 seconds
Full screen Logo This option displays the full screen logo if your image match the screen resolution. The option is disabled by default.
Warnings and
Errors
This option causes the boot process to only pause when warnings or errors detected. The options are:
• Prompt on Warnings and Errors
• Continue on Warnings
• Continue on Warnings and Errors
Virtualization support screen options
Option
Description
Virtualization Allows you to enable or disable the Intel Virtualization Technology.
Enable Intel Virtualization Technology (default).
VT for Direct I/O Enables or disables the Virtual Machine Monitor (VMM) from utilizing the additional hardware capabilities provided
by Intel® Virtualization technology for direct I/O.
Enable VT for Direct I/O - enabled by default.
54 System setup