Dell OptiPlex 7000 Small Form Factor User Manual

Steps
1. Slide the intrusion switch into the slot on the chassis.
2. Insert the connector from intrusion switch cable into the connector on the system board.
Next steps
1. Install the side cover.
2. Follow the procedure in after working inside your computer.
Hard drive
Removing the 2.5-inch hard drive
Prerequisites
1. Follow the procedure in before working inside your computer.
2. Remove the side cover.
3. Remove the front bezel.
Removing and installing components
19

Dell OptiPlex 7000 Small Form Factor Specifications

General

Brand	Dell
Model	OptiPlex 7000 Small Form Factor
Category	Desktop
Language	English