Installing the base cover
1. Slide the base cover to align with the screw holes on the computer.
2. Tighten the screws to secure the base cover to the computer.
3. Install the:
a. battery
b. battery cover
4. Follow the procedure in After working inside your computer.
Removing the Subscriber Identication Module (SIM) card
1. Follow the procedure in Before working inside your computer.
2. Remove the:
a. battery cover
b. battery
c. base cover
3. Press the sim card and remove it from the sim card slot.
Installing the Subscriber Identication Module (SIM) card
1. Slide the sim card in its slot until it clicks in place.
2. Install the:
a. base cover
b. battery
c. battery cover
3. Follow the procedure in After working inside your computer.
Removing the hard drive
1. Follow the procedure in Before working inside your computer.
2. Remove the:
a. battery cover
12