Dell P29E - Installing the Camera; Removing the System Board

Installing the camera
1. Place the camera module in its slot on the computer.
2. Connect the camera cable.
3. Install the:
a. display bezel
b. display assembly
c. palmrest
d. keyboard
e. hard drive
f. base cover
g. battery
h. battery cover
4. Follow the procedure in After working inside your computer.
Removing the system board
1. Follow the procedure in Before working inside your computer.
2. Remove the:
a. SD card
b. battery cover
c. battery
d. base cover
e. hard drive
f. keyboard
g. HDD cable
h. primary memory
i. WLAN card
j. WWAN card
k. M.2 SSD
l. video card
m. power connector port
n. palmrest
31