Keys Navigation
NOTE: For the standard graphics browser only.
Esc Moves to the previous page till you view the main screen. Pressing Esc in the main screen displays a
message that prompts you to save any unsaved changes and restarts the system.
F1 Displays the System Setup help le.
System setup options
NOTE: Depending on your computer and its installed devices, the items listed in this section may or may not appear.
Table 2. General
Option Description
System Information This section lists the primary hardware features of
your computer.
• System Information
• Memory Information
• Processor Information
• Device Information
Battery Information Displays the charge status of the battery.
Boot Sequence Allows you to change the order in which the
computer attempts to nd an operating system. All
the below options are enabled by default.
• UEFI: SAMSUNG SSD SM951 M.2 256GB
PCIe NVMe (Default Setting)
You can also choose the Boot List option. The
options are:
• Legacy
• UEFI (Default Setting)
Advanced Boot Options When in UEFI boot mode, the Enable Legacy
Option ROMs option will allow legacy option ROMs
to load. This option is disabled by default.
NOTE: Without this option, only UEFI
option ROMs will load. This option is
required for Legacy boot mode. This option
is not allowed if Secure Boot is enabled.
• Enable Legacy Option ROMs
Date/Time Allows you to set the date and time.
Table 3. System conguration
Option Description
Integrated NIC Allows you to congure the integrated network
controller. The options are:
• Enable UEFI Network Stack
• Disabled
• Enabled
35
To Next Page
Loading...
