Dell P29E - Page 36

Option Description
• Enabled w/PXE (Default Setting)
Parallel Port Allows you to dene and set how the parallel port
on the docking station operates. You can set the
parallel port to:
• Disabled
• AT (Default Setting)
• PS2
• ECP
Serial Port Identies and denes the serial port settings. You
can set the serial port to:
• Disabled
• COM1 (Default Setting)
• COM2
• COM3
• COM4
NOTE: The operating system may allocate
resources even if the setting is disabled.
SATA Operation Allows you to congure the internal SATA hard-
drive controller. The options are:
• Disabled
• AHCI
• RAID On (Default Setting)
NOTE: SATA is congured to support RAID
mode.
Drives Allows you to enable or disable various drives on
board. The options are:
• SATA-0
• SATA-1
• SATA-3
• SATA-4
• M.2 PCIe SSD-0
• M.2 PCIe SSD-1
Default Setting: The highlighted devices are
enabled.
SMART Reporting This eld controls if the hard drive errors for the
integrated drives are reported during system
startup. This technology is part of the SMART
(Self Monitoring Analysis and Reporting
Technology) specication. This option is disabled by
default.
• Enable SMART Reporting
USB/Thunderbolt Conguration Allows you to dene the USB conguration. The
options are:
• Enable USB Boot Support
• Enable External USB Port
• Enable Thunderbolt Port
36