2. Install the:
a. display bezel
b. display assembly
c. palmrest
d. WWAN card
e. WLAN card
f. base cover
g. hard drive
h. keyboard
i. battery
j. battery cover
k. SD card
3. Follow the procedure in After working inside your computer.
Camera
Removing the camera
1. Follow the procedure in Before working inside your computer.
2. Remove the:
a. SD card
b. battery cover
c. battery
d. keyboard
e. hard drive
f. base cover
g. WWAN card
h. WLAN card
i. palmrest
j. display assembly
k. display bezel
l. display panel
3. To remove camera:
a. Peel the adhesive tape that covers the camera module [1].
b. Disconnect the eDP cable from the camera module [2].
c. Carefully pry the camera module from the system [3].
Removing and installing components
97