Dell PowerConnect 7024 User Manual

770 Configuring Connectivity Fault Management
To add a MEP, click the Add link at the top of the page. A VLAN must be
associated with the selected domain before you configure a MEP to be used
within an MA (see the MA Configuration page).
Dot1ag MIP Configuration
Use the MIP Configuration page to define a switch port as an intermediate
bridge for a selected domain.
To display the
page, click Switching → Dot1ag → MIP Configuration in the
tree view.
Figure 26-8. Dot1ag MIP Configuration

Dell PowerConnect 7024 Specifications

General

Brand	Dell
Model	PowerConnect 7024
Category	Switch
Language	English