Dell PowerConnect W AirWave 7.1 | User Guide Configuring and Using Device Groups in AWMS | 111
Figure 59 Groups > Cisco WLC Config > Security Navigation Illustration
Configuring Management Settings for Cisco
AWMS allows you to configure of SNMP and Syslog Server settings for Cisco WLC controllers. Users should be
able to configure up to four trap receivers on the Cisco WLC including the AMP IP that can be used in global
groups. To define SNMP and server settings, navigate to the Groups > Cisco WLC Config > Management
page, illustrated in Figure 60.
Figure 60 Groups
> Cisco WLC Config > Management Navigation Illustration
To Next Page
Loading...
