20 | Installing AWMS Dell PowerConnect W AirWave 7.1 | User Guide
STEP 4: Assigning AWMS's address
AWMS must be configured with a static IP.
--------------- Primary Network Interface Configuration -------------
1) IP Address : xxx.xxx.xxx.xxx
2) Netmask : xxx.xxx.xxx.xxx
3) Gateway : xxx.xxx.xxx.xxx
4) Primary DNS : xxx.xxx.xxx.xxx
5) Secondary DNS: xxx.xxx.xxx.xxx
9) Commit Changes
0) Exit (discard changes)
If you want to configure a second network interface, please
use AWMS's web interface, AWMS Setup --> Network Tab
1. Enter the network information.
2. Commit the changes by typing 9 and
pressing Enter.
To discard the changes, type 0 and
press Enter.
Step 5: Naming the AWMS Network Administration System
Upon completion of the previous step, the following message appears.
STEP 5: Naming AWMS
AWMS name is currently set to: New AWMS
Please enter a name for your AWMS:
1. At the prompt, enter a name for your AWMS server and press Enter.
Step 6: Assigning a Host Name to the AWMS
Upon completion of the previous step, the following message appears on the screen.
STEP 6: Assigning AWMS's hostname
Does AWMS have a valid DNS name on your network (y/n)?
1. If AWMS does not have a valid host name on the network, enter `n` at the prompt. The following message
appears:
Generating SSL certificate for < IP Address >
2. If AWMS does have a valid host name on the network, enter `y` at the prompt. The following message
appears:
Enter AWMS's DNS name:
3. Type the AWMS DNS name and press Enter. The following message appears:
Generating SSL certificate for < IP Address >
Proceed to the next step as the system prompts you.
Note: The Secondary DNS setting is an optional field.
To Next Page
Loading...
