140 | Discovering, Adding, and Managing Devices Dell PowerConnect W AirWave 7.1 | User Guide
Figure 86 Device Setup > Add > Import Devices via CSV Page Illustration
3. Select a group and folder into which to import the list of devices.
4. Click the B
rowse... button and navigate to the CSV list file.
5. Click Upload to add the list of dev
ices into AWMS. The AWMS user interface provides additional
instructions, supporting links, and examples of CSV file contents.
Adding Universal Devices
AWMS get basic monitoring information from any device including switches, routers and access points whether
or not they are supported devices. Entering SNMP credentials is optional. If no SNMP credentials are entered,
AWMS will provide ICMP monitoring of universal devices. This allows you to monitor key elements of the wired
network infrastructure, including upstream switches, RADIUS servers and other devices. While AWMS can
manage most leading brands and models of wireless infrastructure, universal device support also enables basic
monitoring of many of the less commonly used devices.
Perform these steps to add u
niversal devices to AWMS.
1. Browse to the AWMS D
evice Setup > Add page and select the device vendor name for the wired or wireless
device you are adding. Figure 87 illustrates this page.
To Next Page
Loading...
